Table of Contents
While the default configuration (or “preferences”) make
Mutt usable right out of the box, it is often desirable to tailor Mutt
to suit your own tastes. When Mutt is first invoked, it will attempt to
read the “system” configuration file (defaults set by your
local system administrator), unless the “-n” command line option is specified. This
file is typically /usr/local/share/mutt/Muttrc or
/etc/Muttrc. Mutt will next look for a file named
.muttrc in your home directory. If this file does
not exist and your home directory has a subdirectory named
.mutt, Mutt tries to load a file named
.mutt/muttrc. If still not found, Mutt will try
$XDG_CONFIG_HOME/mutt/muttrc.
.muttrc is the file where you will usually place your
commands to configure Mutt.
In addition, Mutt supports version specific configuration files that are
parsed instead of the default files as explained above. For instance,
if your system has a Muttrc-0.88 file in the system
configuration directory, and you are running version 0.88 of Mutt, this
file will be sourced instead of the Muttrc file. The
same is true of the user configuration file, if you have a file
.muttrc-0.88.6 in your home directory, when you run
Mutt version 0.88.6, it will source this file instead of the default
.muttrc file. The version number is the same which
is visible using the “-v” command line switch or using the
show-version key (default: V) from the index menu.
Mutt is highly configurable because it's meant to
be customized to your needs and preferences. However, this
configurability can make it difficult when just getting started. A
few sample muttrc files come with mutt, under
doc/mutt/samples/. Among them, sample.muttrc-starter is a basic example config with a few
suggested settings and pointers to useful programs.
An initialization file consists of a series of commands. Each line of the file may contain one or more commands. When multiple commands are used, they must be separated by a semicolon (“;”).
The hash mark, or pound sign (“#”), is used as a “comment” character. You can use it to annotate your initialization file. All text after the comment character to the end of the line is ignored.
Example 3.2. Commenting configuration files
my_hdr X-Disclaimer: Why are you listening to me? # This is a comment
Single quotes (“'”) and double quotes (“"”) can be used to quote strings which contain spaces or other special characters. The difference between the two types of quotes is similar to that of many popular shell programs, namely that a single quote is used to specify a literal string (one that is not interpreted for shell variables or quoting with a backslash [see next paragraph]), while double quotes indicate a string for which should be evaluated. For example, backticks are evaluated inside of double quotes, but not for single quotes.
“\” quotes the next character, just as in shells such as bash and zsh. For example, if want to put quotes “"” inside of a string, you can use “\” to force the next character to be a literal instead of interpreted character.
“\\” means to insert a literal “\” into the line. “\n” and “\r” have their usual C meanings of linefeed and carriage-return, respectively.
A “\” at the end of a line can be used to split commands over multiple lines as it “escapes” the line end, provided that the split points don't appear in the middle of command names. Lines are first concatenated before interpretation so that a multi-line can be commented by commenting out the first line only.
Example 3.4. Splitting long configuration commands over several lines
set status_format="some very \ long value split \ over several lines"
It is also possible to substitute the output of a Unix command in an initialization file. This is accomplished by enclosing the command in backticks (``). In Example 3.5, “Using external command's output in configuration files”, the output of the Unix command “uname -a” will be substituted before the line is parsed. Since initialization files are line oriented, only the first line of output from the Unix command will be substituted.
Example 3.5. Using external command's output in configuration files
my_hdr X-Operating-System: `uname -a`
To avoid the output of backticks being parsed, place them inside double quotes. In Example 3.6, “Preventing the output of backticks from being parsed”, the output of the gpg decryption is assigned directly to $imap_pass, so that special characters in the password (e.g.“'”, “#”, “$”) are not parsed and interpreted specially by mutt.
Example 3.6. Preventing the output of backticks from being parsed
set imap_pass="`gpg --batch -q --decrypt ~/.mutt/account.gpg`"
Both environment variables and Mutt variables can be accessed by prepending “$” to the name of the variable. For example,
will cause Mutt to save outgoing messages to a folder named
“sent_on_kremvax” if the environment variable
$HOSTNAME is set to “kremvax.” (See
$record for details.)
Mutt expands the variable when it is assigned, not when it is used. If the value of a variable on the right-hand side of an assignment changes after the assignment, the variable on the left-hand side will not be affected.
If $muttlisp_inline_eval is set, an unquoted parenthesis-enclosed expression will be evaluated as MuttLisp. See the Using MuttLisp section for more details.
Example 3.8. Using MuttLisp expressions
set signature = \ (if (equal $my_name "Kevin McCarthy") ~/kevin.sig ~/other.sig)
The commands understood by Mutt are explained in the next paragraphs. For a complete list, see the command reference.
All configuration files are expected to be in the current locale as specified by the $charset variable which doesn't have a default value since it's determined by Mutt at startup. If a configuration file is not encoded in the same character set the $config_charset variable should be used: all lines starting with the next are recoded from $config_charset to $charset.
This mechanism should be avoided if possible as it has the following implications:
These variables should be set early in a configuration file with $charset preceding $config_charset so Mutt knows what character set to convert to.
If $config_charset is set, it should be set in each configuration file because the value is global and not per configuration file.
Because Mutt first recodes a line before it attempts to parse it, a conversion introducing question marks or other characters as part of errors (unconvertable characters, transliteration) may introduce syntax errors or silently change the meaning of certain tokens (e.g. inserting question marks into regular expressions).
Usage:
group [
-group
name
...] {
-rx
expr
... |
-addr
expr
... }ungroup [
-group
name
...] {
*
|
-rx
expr
... |
-addr
expr
... }
Mutt supports grouping addresses logically into named groups. An address
or address pattern can appear in several groups at the same time. These
groups can be used in patterns (for searching, limiting and tagging) and
in hooks by using group patterns. This can be useful to classify mail
and take certain actions depending on in what groups the message is.
For example, the mutt user's mailing list would fit into the categories
“mailing list” and “mutt-related”. Using send-hook, the sender can
be set to a dedicated one for writing mailing list messages, and the
signature could be set to a mutt-related one for writing to a mutt list
— for other lists, the list sender setting still applies but a
different signature can be selected. Or, given a group only containing
recipients known to accept encrypted mail,
“auto-encryption” can be achieved easily.
The group command is used to directly add either
addresses or regular expressions to the specified group or groups. The
different categories of arguments to the group
command can be in any order. The flags -rx and
-addr specify what the following strings (that cannot
begin with a hyphen) should be interpreted as: either a regular
expression or an email address, respectively.
These address groups can also be created implicitly by the alias, lists, subscribe and alternates commands by
specifying the optional -group option. For example,
alternates -group me address1 address2 alternates -group me -group work address3
would create a group named “me” which contains all your addresses and a group named “work” which contains only your work address address3. Besides many other possibilities, this could be used to automatically mark your own messages in a mailing list folder as read or use a special signature for work-related messages.
The ungroup command is used to remove addresses or
regular expressions from the specified group or groups. The syntax is
similar to the group command, however the special
character * can be used to empty a group of all of
its contents. As soon as a group gets empty because all addresses and
regular expressions have been removed, it'll internally be removed, too
(i.e. there cannot be an empty group). When removing regular expressions
from a group, the pattern must be specified exactly as given to the
group command or -group argument.
Usage:
alias [
-group
name
...]
key
address
[
address
...]unalias [
-group
name
...] {
*
|
key
... }
It's usually very cumbersome to remember or type out the address of someone you are communicating with. Mutt allows you to create “aliases” which map a short string to a full address.
If you want to create an alias for more than one address, you must separate the addresses with a comma (“,”).
The optional -group argument to
alias causes the aliased address(es) to be added to
the named group.
To add an alias:
alias muttdude me@cs.hmc.edu (Michael Elkins) alias theguys manny, moe, jack
To remove an alias or aliases (“*” means all aliases):
unalias muttdude unalias *
Note: The alias key is matched case insensitively when creating (checking for duplicates), removing, or expanding aliases.
Unlike other mailers, Mutt doesn't require aliases to be defined in a
special file. The alias command can appear anywhere
in a configuration file, as long as this file is sourced. Consequently, you
can have multiple alias files, or you can have all aliases defined in
your .muttrc.
On the other hand, the <create-alias>
function can use only one file, the one pointed to by the $alias_file variable (which is
~/.muttrc by default). This file is not special
either, in the sense that Mutt will happily append aliases to any file,
but in order for the new aliases to take effect you need to explicitly
source this file too.
Example 3.9. Configuring external alias files
source /usr/local/share/Mutt.aliases source ~/.mail_aliases set alias_file=~/.mail_aliases
To use aliases, you merely use the alias at any place in Mutt where Mutt prompts for addresses, such as the To: or Cc: prompt. You can also enter aliases in your editor at the appropriate headers if you have the $edit_headers variable set.
In addition, at the various address prompts, you can use the tab character to expand a partial alias to the full alias. If there are multiple matches, Mutt will bring up a menu with the matching aliases. In order to be presented with the full list of aliases, you must hit tab without a partial alias, such as at the beginning of the prompt or after a comma denoting multiple addresses.
In the alias menu, you can select as many aliases as you want with the
tag-entry key (default: <Space> or t), and use
the exit key (default: q) to return to the address
prompt.
Usage:
bind
map
key
function
This command allows you to change the default key bindings (operation invoked when pressing a key).
map specifies in which menu the binding belongs. Multiple maps may be specified by separating them with commas (no additional whitespace is allowed). The currently defined maps are:
This is not a real menu, but is used as a fallback for all of the other menus except for the pager and editor modes. If a key is not defined in another menu, Mutt will look for a binding to use in this menu. This allows you to bind a key to a certain function in multiple menus instead of having multiple bind statements to accomplish the same task.
The alias menu is the list of your personal aliases as defined in your
.muttrc. It is the mapping from a short alias name
to the full email address(es) of the recipient(s).
The attachment menu is used to access the attachments on received messages.
The browser is used for both browsing the local directory structure, and for listing all of your incoming mailboxes.
The editor is used to allow the user to enter a single line of text, such as
the To or Subject prompts in the
compose menu.
The index is the list of messages contained in a mailbox.
The compose menu is the screen used when sending a new message.
The pager is the mode used to display message/attachment data, and help listings.
The pgp menu is used to select the OpenPGP keys used to encrypt outgoing messages.
The smime menu is used to select the OpenSSL certificates used to encrypt outgoing messages.
The postpone menu is similar to the index menu, except is used when recalling a message the user was composing, but saved until later.
The query menu is the browser for results returned by $query_command.
The mixmaster screen is used to select remailer options for outgoing messages (if Mutt is compiled with Mixmaster support).
key is the key (or key sequence) you wish to bind. To specify a control character, use the sequence \Cx, where x is the letter of the control character (for example, to specify control-A use “\Ca”). Note that the case of x as well as \C is ignored, so that \CA, \Ca, \cA and \ca are all equivalent. An alternative form is to specify the key as a three digit octal number prefixed with a “\” (for example \177 is equivalent to \c?). You can also use the form <177>, which allows octal numbers with an arbitrary number of digits. In addition, key may be a symbolic name as shown in Table 3.1, “Symbolic key names”.
Table 3.1. Symbolic key names
| Symbolic name | Meaning |
|---|---|
| \t | tab |
| <tab> | tab |
| <backtab> | backtab / shift-tab |
| \r | carriage return |
| \n | newline |
| \e | escape |
| <esc> | escape |
| <up> | up arrow |
| <down> | down arrow |
| <left> | left arrow |
| <right> | right arrow |
| <pageup> | Page Up |
| <pagedown> | Page Down |
| <backspace> | Backspace |
| <delete> | Delete |
| <insert> | Insert |
| <enter> | Enter |
| <return> | Return |
| <keypadenter> | Enter key on numeric keypad |
| <home> | Home |
| <end> | End |
| <space> | Space bar |
| <f1> | function key 1 |
| <f10> | function key 10 |
The <what-key> function can be used to
explore keycode and symbolic names for other keys on your keyboard.
Executing this function will display information about each key
pressed, until terminated by ^G.
key does not need to be enclosed in quotes unless it contains a space (“ ”) or semi-colon (“;”).
function specifies which action to take when key is pressed. For a complete list of functions, see the reference. Note that the bind expects function to be specified without angle brackets.
The special function <noop> unbinds the
specified key sequence.
Some key bindings are controlled by the terminal, and so by
default can't be bound inside Mutt. These may include
^C, ^\, ^Q,
^S, ^Z, and on BSD/Mac
^Y. These terminal settings can be viewed and
changed using the stty program.
“stty -a” will list the bound
characters (not all of them affect Mutt), and what actions they
take when pressed. For example,
you may see “intr = ^C” in its
output. This means typing ^C will send an
interrupt signal. “quit = ^\”
means typing ^\ (commonly also
^4) will send a quit signal.
To unbind a key from an action, you invoke “stty action
undef”. For example, “stty quit
undef” will unbind ^\ (and
^4) from sending the quit signal. Once unbound
(e.g, by placing that line in your .bashrc, or in a Mutt wrapper
script/function) you can use the key sequence in your Mutt
bindings.
Prior to version 2.2, Mutt used a default ncurses mode
(“nl()”). This mode maps keyboard
input of either <Enter> or
<Return> to the same value, which Mutt
interpreted as <Return> internally.
However, starting in version 2.2, this mode is turned off,
allowing <Return> and
<Enter> to be mapped separately, if
desired. The default keyboard mappings set both, but you can
override this or create new bindings with one or the other (or
both).
Note that in terminal application, such as Mutt,
<Enter> is the same as “\n”
and ^J; while <Return>
is the same as “\r” and ^M.
Usage:
cd
directory
The cd command changes Mutt's current working directory.
This affects commands and functions like source,
change-folder, and save-entry that use
relative paths. Using cd without directory changes to your
home directory.
Usage:
charset-hook
alias
charset
iconv-hook
charset
local-charset
The charset-hook command defines an alias for a character set. This is useful to properly display messages which are tagged with a character set name not known to Mutt.
The iconv-hook command defines a system-specific name for a character set. This is helpful when your systems character conversion library insists on using strange, system-specific names for character sets.
Usage:
folder-hook
[!]regexp
command
It is often desirable to change settings based on which mailbox you are
reading. The folder-hook command provides a method
by which you can execute any configuration command.
regexp is a regular expression specifying in which
mailboxes to execute command before loading. If a
mailbox matches multiple folder-hooks, they are
executed in the order given in the .muttrc.
The regexp parameter has mailbox shortcut expansion performed on the first character. See Mailbox Matching in Hooks for more details.
If you use the “!” shortcut for $spoolfile at the beginning of the pattern, you must place it inside of double or single quotes in order to distinguish it from the logical not operator for the expression.
Settings are not restored when you leave the mailbox. For example, a command action to perform is to change the sorting method based upon the mailbox being read:
folder-hook mutt "set sort=threads"
However, the sorting method is not restored to its previous value when reading a different mailbox. To specify a default command, use the pattern “.” before other folder-hooks adjusting a value on a per-folder basis because folder-hooks are evaluated in the order given in the configuration file.
The keyboard buffer will not be processed until after all hooks are run; multiple push or exec commands will end up being processed in reverse order.
The following example will set the sort
variable to date-sent for all folders but to
threads for all folders containing
“mutt” in their name.
Example 3.10. Setting sort method based on mailbox name
folder-hook . "set sort=date-sent" folder-hook mutt "set sort=threads"
Usage:
macro
menu
key
sequence
[
description
]
Macros are useful when you would like a single key to perform a series of actions. When you press key in menu menu, Mutt will behave as if you had typed sequence. So if you have a common sequence of commands you type, you can create a macro to execute those commands with a single key or fewer keys.
menu is the map which the macro will be bound in. Multiple maps may be specified by separating multiple menu arguments by commas. Whitespace may not be used in between the menu arguments and the commas separating them.
key and sequence are expanded by the same rules as the key bindings with some additions. The first is that control characters in sequence can also be specified as ^x. In order to get a caret (“^”) you need to use ^^. Secondly, to specify a certain key such as up or to invoke a function directly, you can use the format <key name> and <function name>. For a listing of key names see the section on key bindings. Functions are listed in the reference.
The advantage with using function names directly is that the macros will work regardless of the current key bindings, so they are not dependent on the user having particular key definitions. This makes them more robust and portable, and also facilitates defining of macros in files used by more than one user (e.g., the system Muttrc).
Optionally you can specify a descriptive text after sequence, which is shown in the help screens if they contain a description.
Macro definitions (if any) listed in the help screen(s), are silently truncated at the screen width, and are not wrapped.
Usage:
color
object
[
attribute
...]
foreground
background
color {
header
|
body
} [
attribute
...]
foreground
background
regexp
color
index
[
attribute
...]
foreground
background
pattern
color
compose
composeobject
[
attribute
...]
foreground
background
uncolor {
index
|
header
|
body
} {
*
|
pattern
... }
If your terminal supports color, you can spice up Mutt by creating your own color scheme. To define the color of an object (type of information), you must specify both a foreground color and a background color (it is not possible to only specify one or the other).
header and body match regexp in the header/body of a message, index matches pattern in the message index. Note that IMAP server-side searches (=b, =B, =h) are not supported for color index patterns.
When $header_color_partial is unset (the default), a header matched by regexp will have color applied to the entire header. When set, color is applied only to the exact text matched by regexp.
object can be one of:
attachment
bold (highlighting bold patterns in the body of messages)
error (error messages printed by Mutt)
hdrdefault (default color of the message header in the pager)
indicator (arrow or bar used to indicate the current item in a menu)
markers (the “+” markers at the beginning of wrapped lines in the pager)
message (informational messages)
normal
prompt
quoted (text matching $quote_regexp in the body of a message)
quoted1, quoted2, ..., quotedN (higher levels of quoting)
search (highlighting of words in the pager)
signature
status (mode lines used to display info about the mailbox or message)
tilde (the “~” used to pad blank lines in the pager)
tree (thread tree drawn in the message index and attachment menu)
underline (highlighting underlined patterns in the body of messages)
composeobject can be one of:
header
security_encrypt
security_sign
security_both
security_none
attribute can be one of the following:
none
bold
underline
reverse
standout
foreground and background can be one of the following:
white
black
green
magenta
blue
cyan
yellow
red
default
colorx
The color name can optionally be prefixed with the keyword
bright or light to make the color
boldfaced or light (e.g., brightred). The precise
behavior depends on the terminal and its configuration. In particular,
the boldfaced/light difference and such background colors may be
available only for terminals configured with at least 16 colors,
as specified by the $TERM environment variable.
If your terminal supports it, the special keyword
default can be used as a transparent color. The
value brightdefault is also valid. If Mutt is
linked against the S-Lang library, you also need to
set the $COLORFGBG environment variable to the
default colors of your terminal for this to work; for example (for
Bourne-like shells):
set COLORFGBG="green;black" export COLORFGBG
The S-Lang library requires you to use the lightgray and brown keywords instead of white and yellow when setting this variable.
The uncolor command can be applied to the index, header and body objects only. It removes entries from the list. You must specify the same pattern specified in the color command for it to be removed. The pattern “*” is a special token which means to clear the color list of all entries.
Mutt also recognizes the keywords color0, color1, ..., colorN-1 (N being the number of colors supported by your terminal). This is useful when you remap the colors for your display (for example by changing the color associated with color2 for your xterm), since color names may then lose their normal meaning.
If your terminal does not support color, it is still possible change the video attributes through the use of the “mono” command. Usage:
mono
object
attribute
mono {
header
|
body
}
attribute
regexp
mono
index
attribute
pattern
mono
compose
composeobject
attribute
unmono {
index
|
header
|
body
} {
*
|
pattern
... }
For object, composeobject, and attribute, see the color command.
When displaying a message in the pager, Mutt folds long header lines at $wrap columns. Though there're precise rules about where to break and how, Mutt always folds headers using a tab for readability. (Note that the sending side is not affected by this, Mutt tries to implement standards compliant folding.)
Despite not being a real header, Mutt will also display an mbox "From_" line in the pager along with other headers. This line can be manipulated with ignore/unignore and hdr_order/unhdr_order commands.
Usage:
ignore
pattern
[
pattern
...]unignore {
*
|
pattern
... }
Messages often have many header fields added by automatic processing systems, or which may not seem useful to display on the screen. This command allows you to specify header fields which you don't normally want to see in the pager.
You do not need to specify the full header field name. For example, “ignore content-” will ignore all header fields that begin with the pattern “content-”. “ignore *” will ignore all headers.
To remove a previously added token from the list, use the “unignore” command. The “unignore” command will make Mutt display headers with the given pattern. For example, if you do “ignore x-” it is possible to “unignore x-mailer”.
“unignore *” will remove all tokens from the ignore list.
Example 3.11. Header weeding
# Sven's draconian header weeding
ignore *
unignore from date subject to cc
unignore organization organisation x-mailer: x-newsreader: x-mailing-list:
unignore posted-to:
The above example will show "From:" headers as well as mbox
"From_" lines. To hide the latter, instead use
"unignore from: date subject to cc" on
the second line.
Usage:
hdr_order
header
[
header
...]unhdr_order {
*
|
header
... }
With the hdr_order command you can specify an order in which Mutt will attempt to present these headers to you when viewing messages.
“unhdr_order *” will clear all previous headers from the order list, thus removing the header order effects set by the system-wide startup file.
Usage:
alternates [
-group
name
...]
regexp
[
regexp
...]unalternates [
-group
name
...] {
*
|
regexp
... }
With various functions, Mutt will treat messages differently, depending on whether you sent them or whether you received them from someone else. For instance, when replying to a message that you sent to a different party, Mutt will automatically suggest to send the response to the original message's recipients — responding to yourself won't make much sense in many cases. (See $reply_to.)
Many users receive e-mail under a number of different addresses. To fully use Mutt's features here, the program must be able to recognize what e-mail addresses you receive mail under. That's the purpose of the alternates command: It takes a list of regular expressions, each of which can identify an address under which you receive e-mail.
As addresses are matched using regular expressions and not exact strict comparisons, you should make sure you specify your addresses as precise as possible to avoid mismatches. For example, if you specify:
alternates user@example
Mutt will consider “some-user@example”
as being your address, too which may not be desired. As a solution, in
such cases addresses should be specified as:
alternates '^user@example$'
The -group flag causes all of the subsequent regular
expressions to be added to the named group.
The unalternates command can be used to write exceptions to alternates patterns. If an address matches something in an alternates command, but you nonetheless do not think it is from you, you can list a more precise pattern under an unalternates command.
To remove a regular expression from the alternates list, use the unalternates command with exactly the same regexp. Likewise, if the regexp for an alternates command matches an entry on the unalternates list, that unalternates entry will be removed. If the regexp for unalternates is “*”, all entries on alternates will be removed.
Usage:
lists [
-group
name
...]
regexp
[
regexp
...]unlists {
*
|
regexp
... }subscribe [
-group
name
...]
regexp
[
regexp
...]unsubscribe {
*
|
regexp
... }
Mutt has a few nice features for handling
mailing lists. In order to take advantage of them, you must
specify which addresses belong to mailing lists, and which mailing lists
you are subscribed to. Mutt also has limited support for auto-detecting
mailing lists: it supports parsing mailto: links in
the common List-Post: header which has the same
effect as specifying the list address via the lists
command (except the group feature). Once you have done this, the <list-reply>
function will work for all known lists. Additionally, when you send a
message to a known list and $followup_to is set, Mutt will add a
Mail-Followup-To header. For unsubscribed lists, this will include
your personal address, ensuring you receive a copy of replies. For
subscribed mailing lists, the header will not, telling other users'
mail user agents not to send copies of replies to your personal
address.
The Mail-Followup-To header is a non-standard extension which is not supported by all mail user agents. Adding it is not bullet-proof against receiving personal CCs of list messages. Also note that the generation of the Mail-Followup-To header is controlled by the $followup_to configuration variable since it's common practice on some mailing lists to send Cc upon replies (which is more a group- than a list-reply).
More precisely, Mutt maintains lists of patterns for the addresses of known and subscribed mailing lists. Every subscribed mailing list is known. To mark a mailing list as known, use the list command. To mark it as subscribed, use subscribe.
You can use regular expressions with both commands. To mark all messages sent to a specific bug report's address on Debian's bug tracking system as list mail, for instance, you could say
subscribe [0-9]+.*@bugs.debian.org
as it's often sufficient to just give a portion of the list's e-mail address.
Specify as much of the address as you need to remove ambiguity. For
example, if you've subscribed to the Mutt mailing list, you will receive
mail addressed to mutt-users@mutt.org. So, to tell
Mutt that this is a mailing list, you could add lists
mutt-users@ to your initialization file. To tell Mutt that
you are subscribed to it, add subscribe
mutt-users to your initialization file instead. If you also
happen to get mail from someone whose address is
mutt-users@example.com, you could use
lists ^mutt-users@mutt\\.org$ or
subscribe ^mutt-users@mutt\\.org$
to match only mail from the actual list.
The -group flag adds all of the subsequent regular
expressions to the named address group
in addition to adding to the specified address list.
The “unlists” command is used to remove a token from the list of known and subscribed mailing-lists. Use “unlists *” to remove all tokens.
To remove a mailing list from the list of subscribed mailing lists, but keep it on the list of known mailing lists, use unsubscribe.
All of the mailing list configuration options described so far govern mutt's knowledge of your list subscriptions and how it presents list information to you. If you have a message from a mailing list, you can also use the list menu (bound to "ESC L" by default) to interact with the message's list's list server. This makes it easy to subscribe, unsubscribe, and so on.
Usage:
mbox-hook
[!]regexp
mailbox
This command is used to move read messages from a specified mailbox to a different mailbox automatically when you quit or change folders. regexp is a regular expression specifying the mailbox to treat as a “spool” mailbox and mailbox specifies where mail should be saved when read.
The regexp parameter has mailbox shortcut expansion performed on the first character. See Mailbox Matching in Hooks for more details.
Note that execution of mbox-hooks is dependent on the $move configuration variable. If set to “no” (the default), mbox-hooks will not be executed.
Unlike some of the other hook commands, only the first matching regexp is used (it is not possible to save read mail in more than a single mailbox).
Usage:
mailboxes [
[
-notify
|
-nonotify
]
[
-poll
|
-nopoll
]
[
-label
label
|
-nolabel
]
mailbox
] [...]unmailboxes {
*
|
mailbox
... }
This command specifies folders which can receive mail and which will be checked for new messages periodically.
Use -nonotify to disable notifying when new mail
arrives. The -notify argument can be used to reenable
notifying for an existing mailbox. If unspecified: a new
mailbox will notify by default, while an existing mailbox will be
unchanged.
To disable polling, specify -nopoll before the
mailbox name. The -poll argument can be used to
reenable polling for an existing mailbox. If unspecified: a new
mailbox will poll by default, while an existing mailbox will be
unchanged.
The -label argument can be used to specify an
alternative label to print in the sidebar or mailbox browser instead
of the mailbox path. A label may be removed via the
-nolabel argument. If unspecified, an existing
mailbox label will be unchanged.
mailbox can either be a local file or directory (Mbox/Mmdf or Maildir/Mh). If Mutt was built with POP and/or IMAP support, mailbox can also be a POP/IMAP folder URL. The URL syntax is described in Section 1.2, “URL Syntax”, POP and IMAP are described in Section 3, “POP3 Support” and Section 4, “IMAP Support” respectively.
Mutt provides a number of advanced features for handling (possibly many) folders and new mail within them, please refer to Section 13, “New Mail Detection” for details (including in what situations and how often Mutt checks for new mail). Additionally, $new_mail_command can be used to run a command when new mail is detected.
The “unmailboxes” command is used to remove a token from the list of folders which receive mail. Use “unmailboxes *” to remove all tokens.
The folders in the mailboxes command are resolved when the command is executed, so if these names contain shortcut characters (such as “=” and “!”), any variable definition that affects these characters (like $folder and $spoolfile) should be set before the mailboxes command. If none of these shortcuts are used, a local path should be absolute as otherwise Mutt tries to find it relative to the directory from where Mutt was started which may not always be desired.
Usage:
my_hdr
string
unmy_hdr {
*
|
field
... }
The my_hdr command allows you to create your own header fields which will be added to every message you send and appear in the editor if $edit_headers is set.
For example, if you would like to add an “Organization:”
header field to all of your outgoing messages, you can put the command
something like shown in Example 3.13, “Defining custom headers” in your
.muttrc.
Space characters are not allowed between the keyword and the colon (“:”). The standard for electronic mail (RFC2822) says that space is illegal there, so Mutt enforces the rule.
If you would like to add a header field to a single message, you should
either set the $edit_headers
variable, or use the <edit-headers> function
(default: “E”) in the compose menu so that you can edit the
header of your message along with the body.
To remove user defined header fields, use the unmy_hdr command. You may specify an asterisk (“*”) to remove all header fields, or the fields to remove. For example, to remove all “To” and “Cc” header fields, you could use:
unmy_hdr to cc
Usage:
save-hook
[!]pattern
mailbox
This command is used to override the default mailbox used when saving messages. mailbox will be used as the default if the message matches pattern, see Message Matching in Hooks for information on the exact format.
To provide more flexibility and good defaults, Mutt applies the expandos of $index_format to mailbox after it was expanded.
Example 3.14. Using %-expandos in save-hook
# default: save all to ~/Mail/<author name> save-hook . ~/Mail/%F # save from me@turing.cs.hmc.edu and me@cs.hmc.edu to $folder/elkins save-hook me@(turing\\.)?cs\\.hmc\\.edu$ +elkins # save from aol.com to $folder/spam save-hook aol\\.com$ +spam
Also see the fcc-save-hook command.
Usage:
fcc-hook
[!]pattern
mailbox
This command is used to save outgoing mail in a mailbox other than $record. Mutt searches the initial list of message recipients for the first matching pattern and uses mailbox as the default Fcc: mailbox. If no match is found the message will be saved to $record mailbox.
To provide more flexibility and good defaults, Mutt applies the expandos of $index_format to mailbox after it was expanded.
See Message Matching in Hooks for information on the exact format of pattern.
fcc-hook [@.]aol\\.com$ +spammers
...will save a copy of all messages going to the aol.com domain to the `+spammers' mailbox by default. Also see the fcc-save-hook command.
Multiple mailboxes may be specified by separating them with $fcc_delimiter, if set:
set fcc_delimiter = ',' fcc-hook 'foo@example\.com$' '+one,+two'
Usage:
fcc-save-hook
[!]pattern
mailbox
This command is a shortcut, almost equivalent to doing both a fcc-hook and a save-hook with its arguments, including %-expansion on mailbox according to $index_format.
Note, however that the fcc-save-hook is not designed to take advantage of multiple mailboxes, as fcc-hook is. For correct behavior, you should use separate fcc and save hooks in that case.
Usage:
reply-hook
[!]pattern
command
send-hook
[!]pattern
command
send2-hook
[!]pattern
command
These commands can be used to execute arbitrary configuration commands based upon recipients of the message. pattern is used to match the message, see Message Matching in Hooks for details. command is executed when pattern matches.
reply-hook is matched against the message you are replying to, instead of the message you are sending. send-hook is matched against all messages, both new and replies.
reply-hooks are matched before the
send-hook, regardless of the order
specified in the user's configuration file. However, you can inhibit
send-hook in the reply case by using the pattern
'! ~Q' (not replied, see
Message Matching in Hooks) in the send-hook to tell
when reply-hook have been executed.
send2-hook is matched every time a message is changed, either by editing it, or by using the compose menu to change its recipients or subject. send2-hook is executed after send-hook, and can, e.g., be used to set parameters such as the $sendmail variable depending on the message's sender address.
For each type of send-hook or
reply-hook, when multiple matches occur, commands are
executed in the order they are specified in the
.muttrc (for that type of hook).
Example: send-hook mutt
"set mime_forward signature=''"
Another typical use for this command is to change the values of the $attribution, $attribution_locale, and $signature variables in order to change the language of the attributions and signatures based upon the recipients.
send-hook's are only executed once after getting the initial list of recipients. They are not executed when resuming a postponed draft. Adding a recipient after replying or editing the message will not cause any send-hook to be executed, similarly if $autoedit is set (as then the initial list of recipients is empty). Also note that my_hdr commands which modify recipient headers, or the message's subject, don't have any effect on the current message when executed from a send-hook.
Usage:
message-hook
[!]pattern
command
This command can be used to execute arbitrary configuration commands
before viewing or formatting a message based upon information about the
message. command is executed if the
pattern matches the message to be displayed. When
multiple matches occur, commands are executed in the order they are
specified in the .muttrc.
See Message Matching in Hooks for information on the exact format of pattern.
Example:
message-hook ~A 'set pager=builtin' message-hook '~f freshmeat-news' 'set pager="less \"+/^ subject: .*\""'
Usage:
crypt-hook
regexp
keyid
When encrypting messages with PGP/GnuPG or OpenSSL, you may want to associate a certain key with a given e-mail address automatically, either because the recipient's public key can't be deduced from the destination address, or because, for some reasons, you need to override the key Mutt would normally use. The crypt-hook command provides a method by which you can specify the ID of the public key to be used when encrypting messages to a certain recipient. You may use multiple crypt-hooks with the same regexp; multiple matching crypt-hooks result in the use of multiple keyids for a recipient. During key selection, Mutt will confirm whether each crypt-hook is to be used (unless the $crypt_confirmhook option is unset). If all crypt-hooks for a recipient are declined, Mutt will use the original recipient address for key selection instead.
The meaning of keyid is to be taken broadly in this context: You can either put a numerical key ID or fingerprint here, an e-mail address, or even just a real name.
Usage:
index-format-hook
name
[!]pattern
format-string
This command is used to inject format strings dynamically into $index_format based on pattern matching against the current message.
The $index_format expando %@name@ specifies a placeholder for the injection. Index-format-hooks with the same name are matched using pattern against the current message. Matching is done in the order specified in the .muttrc, with the first match being used. The hook's format-string is then substituted and evaluated.
Because the first match is used, best practice is to put a catch-all ~A pattern as the last hook. Here is an example showing how to implement dynamic date formatting:
set index_format="%4C %-6@date@ %-15.15F %Z (%4c) %s" index-format-hook date "~d<1d" "%[%H:%M]" index-format-hook date "~d<1m" "%[%a %d]" index-format-hook date "~d<1y" "%[%b %d]" index-format-hook date "~A" "%[%m/%y]"
Another example, showing a way to prepend to the subject. Note that without a catch-all ~A pattern, no match results in the expando being replaced with an empty string.
set index_format="%4C %@subj_flags@%s" index-format-hook subj_flags "~f boss@example.com" "** BOSS ** " index-format-hook subj_flags "~f spouse@example.com" ":-) "
Usage:
push
string
This command adds the named string to the beginning of the keyboard buffer. The string may contain control characters, key names and function names like the sequence string in the macro command. You may use it to automatically run a sequence of commands at startup, or when entering certain folders. For example, Example 3.15, “Embedding push in folder-hook” shows how to automatically collapse all threads when entering a folder.
For using functions like shown in the example, it's important to use
angle brackets (“<” and “>”) to make
Mutt recognize the input as a function name. Otherwise it will simulate
individual just keystrokes, i.e. “push
collapse-all” would be interpreted as if you had typed
“c”, followed by “o”, followed by
“l”, ..., which is not desired and may lead to very
unexpected behavior.
Keystrokes can be used, too, but are less portable because of potentially changed key bindings. With default bindings, this is equivalent to the above example:
folder-hook . 'push \eV'
because it simulates that Esc+V was pressed (which is the default
binding of <collapse-all>).
Usage:
exec
function
[
function
...]
This command can be used to execute any function. Functions are listed
in the function reference.
“exec function” is
equivalent to “push <function>”.
Usage:
score
pattern
value
unscore {
*
|
pattern
... }
The score commands adds value
to a message's score if pattern matches it.
pattern is a string in the format described in
the patterns section (note: For
efficiency reasons, patterns which scan information not available in
the index, such as ~b, ~B,
~h, ~M, or ~X
may not be used). value is a positive or
negative integer. A message's final score is the sum total of all
matching score entries. However, you may
optionally prefix value with an equal sign
(“=”) to cause evaluation to stop at a particular entry
if there is a match. Negative final scores are rounded up to 0.
The unscore command removes score entries from the list. You must specify the same pattern specified in the score command for it to be removed. The pattern “*” is a special token which means to clear the list of all score entries.
Scoring occurs as the messages are read in, before the mailbox is sorted. Because of this, patterns which depend on threading, such as ~=, ~$, and ~(), will not work by default. A workaround is to push the scoring command in a folder hook. This will cause the mailbox to be rescored after it is opened and input starts being processed:
folder-hook . 'push "<enter-command>score ~= 10<enter>"'
Usage:
spam
pattern
format
nospam {
*
|
pattern
}
Mutt has generalized support for external spam-scoring filters. By
defining your spam patterns with the spam and
nospam commands, you can limit,
search, and sort your mail
based on its spam attributes, as determined by the external filter. You
also can display the spam attributes in your index display using the
%H selector in the $index_format variable. (Tip: try
%?H?[%H] ? to display spam tags only when they are
defined for a given message.)
Note: the value displayed by %H and searched by
~H is stored in the header
cache. Mutt isn't smart enough to invalidate a header cache
entry based on changing spam rules, so if you
aren't seeing correct %H values, try temporarily
turning off the header cache. If that fixes the problem, then once
your spam rules are set to your liking, remove your stale header cache
files and turn the header cache back on.
Your first step is to define your external filter's spam patterns using
the spam command. pattern should
be a regular expression that matches a header in a mail message. If any
message in the mailbox matches this regular expression, it will receive
a “spam tag” or “spam attribute” (unless it
also matches a nospam pattern — see below.) The
appearance of this attribute is entirely up to you, and is governed by
the format parameter. format
can be any static text, but it also can include back-references from the
pattern expression. (A regular expression
“back-reference” refers to a sub-expression contained
within parentheses.) %1 is replaced with the first
back-reference in the regex, %2 with the second, etc.
To match spam tags, mutt needs the corresponding header information which is always the case for local and POP folders but not for IMAP in the default configuration. Depending on the spam header to be analyzed, $imap_headers may need to be adjusted.
If you're using multiple spam filters, a message can have more than one spam-related header. You can define spam patterns for each filter you use. If a message matches two or more of these patterns, and the $spam_separator variable is set to a string, then the message's spam tag will consist of all the format strings joined together, with the value of $spam_separator separating them.
For example, suppose one uses DCC, SpamAssassin, and PureMessage, then the configuration might look like in Example 3.16, “Configuring spam detection”.
Example 3.16. Configuring spam detection
spam "X-DCC-.*-Metrics:.*(....)=many" "90+/DCC-%1" spam "X-Spam-Status: Yes" "90+/SA" spam "X-PerlMX-Spam: .*Probability=([0-9]+)%" "%1/PM" set spam_separator=", "
If then a message is received that DCC registered with
“many” hits under the “Fuz2” checksum, and
that PureMessage registered with a 97% probability of being spam, that
message's spam tag would read 90+/DCC-Fuz2,
97/PM. (The four characters before “=many” in a
DCC report indicate the checksum used — in this case,
“Fuz2”.)
If the $spam_separator variable is unset, then each spam pattern match supersedes the previous one. Instead of getting joined format strings, you'll get only the last one to match.
The spam tag is what will be displayed in the index when you use
%H in the $index_format variable. It's also the
string that the ~H pattern-matching expression
matches against for <search> and
<limit> functions. And it's what sorting by
spam attribute will use as a sort key.
That's a pretty complicated example, and most people's actual environments will have only one spam filter. The simpler your configuration, the more effective Mutt can be, especially when it comes to sorting.
Generally, when you sort by spam tag, Mutt will sort
lexically — that is, by ordering strings
alphanumerically. However, if a spam tag begins with a number, Mutt will
sort numerically first, and lexically only when two numbers are equal in
value. (This is like UNIX's sort -n.) A message with
no spam attributes at all — that is, one that didn't match
any of your spam patterns
— is sorted at lowest priority. Numbers are sorted next, beginning
with 0 and ranging upward. Finally, non-numeric strings are sorted, with
“a” taking lower priority than “z”. Clearly,
in general, sorting by spam tags is most effective when you can coerce
your filter to give you a raw number. But in case you can't, Mutt can
still do something useful.
The nospam command can be used to write exceptions to spam patterns. If a header pattern matches something in a spam command, but you nonetheless do not want it to receive a spam tag, you can list a more precise pattern under a nospam command.
If the pattern given to nospam is exactly the same as the pattern on an existing spam list entry, the effect will be to remove the entry from the spam list, instead of adding an exception. Likewise, if the pattern for a spam command matches an entry on the nospam list, that nospam entry will be removed. If the pattern for nospam is “*”, all entries on both lists will be removed. This might be the default action if you use spam and nospam in conjunction with a folder-hook.
You can have as many spam or
nospam commands as you like. You can even do your
own primitive spam detection within Mutt — for
example, if you consider all mail from MAILER-DAEMON
to be spam, you can use a spam command like this:
spam "^From: .*MAILER-DAEMON" "999"
Mutt supports these types of configuration variables:
A boolean expression, either “yes” or “no”.
A signed integer number in the range -32768 to 32767.
A signed integer number in the range -2147483648 to 2147483647.
Arbitrary text.
A specialized string for representing paths including support for mailbox shortcuts (see Section 10, “Mailbox Shortcuts”) as well as tilde (“~”) for a user's home directory and more.
Like a boolean but triggers a prompt when set to “ask-yes” or “ask-no” with “yes” and “no” preselected respectively.
A specialized string allowing only particular words as values depending on the variable.
A regular expression, see Section 2, “Regular Expressions” for an introduction.
Specifies the type of folder to use: mbox, mmdf, mh or maildir. Currently only used to determine the type for newly created folders.
An e-mail address either with or without realname. The older
“user@example.org (Joe User)” form is
supported but strongly deprecated.
Arbitrary text, see Section 29.3, “User-Defined Variables” for details.
The following commands are available to manipulate and query variables:
Usage:
set {
[ no | inv ]
variable
|
variable=value
} [...]toggle
variable
[
variable
...]unset
variable
[
variable
...]reset
variable
[
variable
...]
This command is used to set (and unset) configuration variables. There are four basic types of variables: boolean, number, string and quadoption. boolean variables can be set (true) or unset (false). number variables can be assigned a positive integer value. string variables consist of any number of printable characters and must be enclosed in quotes if they contain spaces or tabs. You may also use the escape sequences “\n” and “\t” for newline and tab, respectively. quadoption variables are used to control whether or not to be prompted for certain actions, or to specify a default action. A value of yes will cause the action to be carried out automatically as if you had answered yes to the question. Similarly, a value of no will cause the action to be carried out as if you had answered “no.” A value of ask-yes will cause a prompt with a default answer of “yes” and ask-no will provide a default answer of “no.”
Prefixing a variable with “no” will unset it. Example:
set noaskbcc.
For boolean variables, you may optionally prefix
the variable name with inv to toggle the value (on or
off). This is useful when writing macros. Example:
set invsmart_wrap.
The toggle command automatically prepends the
inv prefix to all specified variables.
The unset command automatically prepends the
no prefix to all specified variables.
Using the <enter-command> function in the
index menu, you can query the value of a variable
by prefixing the name of the variable with a question mark:
set ?allow_8bit
The question mark is actually only required for boolean and quadoption variables.
The reset command resets all given variables to the compile time defaults (hopefully mentioned in this manual). If you use the command set and prefix the variable with “&” this has the same behavior as the reset command.
With the reset command there exists the special variable “all”, which allows you to reset all variables to their system defaults.
Along with the variables listed in the Configuration variables section, Mutt
supports user-defined variables with names starting with
my_ as in, for example, my_cfgdir.
The set command either creates a custom
my_ variable or changes its value if it does exist
already. The unset and reset
commands remove the variable entirely.
Since user-defined variables are expanded in the same way that environment variables are (except for the shell-escape command and backtick expansion), this feature can be used to make configuration files more readable.
The following example defines and uses the variable
my_cfgdir to abbreviate the calls of the source command:
Example 3.17. Using user-defined variables for config file readability
set my_cfgdir = $HOME/mutt/config
source $my_cfgdir/hooks
source $my_cfgdir/macros
# more source commands...
A custom variable can also be used in macros to backup the current value
of another variable. In the following example, the value of the $delete is changed temporarily while its
original value is saved as my_delete. After the
macro has executed all commands, the original value of $delete is restored.
Example 3.18. Using user-defined variables for backing up other config option values
macro pager ,x '\ <enter-command>set my_delete=$delete<enter>\ <enter-command>set delete=yes<enter>\ ...\ <enter-command>set delete=$my_delete<enter>'
Since Mutt expands such values already when parsing the configuration
file(s), the value of $my_delete in the
last example would be the value of $delete exactly
as it was at that point during parsing the configuration file. If
another statement would change the value for $delete
later in the same or another file, it would have no effect on
$my_delete. However, the expansion can
be deferred to runtime, as shown in the next example, when escaping the
dollar sign.
Example 3.19. Deferring user-defined variable expansion to runtime
macro pager <PageDown> "\ <enter-command> set my_old_pager_stop=\$pager_stop pager_stop<Enter>\ <next-page>\ <enter-command> set pager_stop=\$my_old_pager_stop<Enter>\ <enter-command> unset my_old_pager_stop<Enter>"
Note that there is a space between
<enter-command> and the set
configuration command, preventing Mutt from recording the
macro's commands into its history.
Variables are always assigned string values which Mutt parses into its internal representation according to the type of the variable, for example an integer number for numeric types. For all queries (including $-expansion) the value is converted from its internal type back into string. As a result, any variable can be assigned any value given that its content is valid for the target. This also counts for custom variables which are of type string. In case of parsing errors, Mutt will print error messages. Example 3.20, “Type conversions using variables” demonstrates type conversions.
Example 3.20. Type conversions using variables
set my_lines = "5" # value is string "5" set pager_index_lines = $my_lines # value is integer 5 set my_sort = "date-received" # value is string "date-received" set sort = "last-$my_sort" # value is sort last-date-received set my_inc = $read_inc # value is string "10" (default of $read_inc) set my_foo = $my_inc # value is string "10"
These assignments are all valid. If, however, the value of
$my_lines would have been
“five” (or something else that cannot be parsed into a
number), the assignment to
$pager_index_lines would have
produced an error message.
Type conversion applies to all configuration commands which take arguments. But please note that every expanded value of a variable is considered just a single token. A working example is:
set my_pattern = "~A"
set my_number = "10"
# same as: score ~A +10
score $my_pattern +$my_numberWhat does not work is:
set my_mx = "+mailbox1 +mailbox2" mailboxes $my_mx +mailbox3
because the value of $my_mx is interpreted as a
single mailbox named “+mailbox1 +mailbox2” and not two
distinct mailboxes.
Usage:
source
filename
This command allows the inclusion of initialization commands from other
files. For example, I place all of my aliases in
~/.mail_aliases so that I can make my
~/.muttrc readable and keep my aliases private.
If the filename begins with a tilde (“~”), it will be expanded to the path of your home directory.
If the filename ends with a vertical bar (“|”), then
filename is considered to be an executable program
from which to read input (e.g. source
~/bin/myscript|).
Usage:
unhook {
*
|
hook-type
}
This command permits you to flush hooks you have previously defined.
You can either remove all hooks by giving the “*” character
as an argument, or you can remove all hooks of a specific type by saying
something like unhook send-hook.
Format strings are a general concept you'll find in several locations through the Mutt configuration, especially in the $index_format, $pager_format, $status_format, and other related variables. These can be very straightforward, and it's quite possible you already know how to use them.
The most basic format string element is a percent symbol followed by
another character. For example, %s represents a
message's Subject: header in the $index_format variable. The
“expandos” available are documented with each format
variable, but there are general modifiers available with all formatting
expandos, too. Those are our concern here.
Some of the modifiers are borrowed right out of C (though you might know
them from Perl, Python, shell, or another language). These are the
[-]m.n modifiers, as in
%-12.12s. As with such programming languages, these
modifiers allow you to specify the minimum and maximum size of the
resulting string, as well as its justification. If the “-”
sign follows the percent, the string will be left-justified instead of
right-justified. If there's a number immediately following that, it's
the minimum amount of space the formatted string will occupy — if
it's naturally smaller than that, it will be padded out with spaces. If
a decimal point and another number follow, that's the maximum space
allowable — the string will not be permitted to exceed that width,
no matter its natural size. Each of these three elements is optional, so
that all these are legal format strings: %-12s,
%4c, %.15F and
%-12.15L.
Mutt adds some other modifiers to format strings. If you use an equals
symbol (=) as a numeric prefix (like the minus
above), it will force the string to be centered within its minimum space
range. For example, %=14y will reserve 14 characters
for the %y expansion — that's the X-Label: header, in $index_format. If the expansion results in
a string less than 14 characters, it will be centered in a 14-character
space. If the X-Label for a message were “test”, that
expansion would look like
“ test ”.
There are two very little-known modifiers that affect the way that an expando is replaced. If there is an underline (“_”) character between any format modifiers (as above) and the expando letter, it will expands in all lower case. And if you use a colon (“:”), it will replace all decimal points with underlines.
Depending on the format string variable, some of its sequences can be used to optionally print a string if their value is nonzero. For example, you may only want to see the number of flagged messages if such messages exist, since zero is not particularly meaningful. To optionally print a string based upon one of the above sequences, the following construct is used:
%?<sequence_char>?<optional_string>?
where sequence_char is an expando, and optional_string is the string you would like printed if sequence_char is nonzero. optional_string may contain other sequences as well as normal text, but you may not nest optional strings.
Here is an example illustrating how to optionally print the number of new messages in a mailbox in $status_format:
%?n?%n new messages.?
You can also switch between two strings using the following construct:
%?<sequence_char>?<if_string>&<else_string>?
If the value of sequence_char is non-zero, if_string will be expanded, otherwise else_string will be expanded.
Any format string ending in a vertical bar (“|”) will be expanded and piped through the first word in the string, using spaces as separator. The string returned will be used for display. If the returned string ends in %, it will be passed through the formatter a second time. This allows the filter to generate a replacement format string including % expandos.
All % expandos in a format string are expanded before the script is called so that:
will make Mutt expand %r, %f and
%L before calling the script. The example also shows
that arguments can be quoted: the script will receive the expanded
string between the single quotes as the only argument.
A practical example is the mutt_xtitle script
installed in the samples subdirectory of the Mutt
documentation: it can be used as filter for $status_format to set the current
terminal's title, if supported.
In most format strings, Mutt supports different types of padding using special %-expandos:
%|X
When this occurs, Mutt will fill the rest of the line with the character
X. For example, filling the rest of the line with
dashes is done by setting:
set status_format = "%v on %h: %B: %?n?%n&no? new messages %|-"
%>X
Since the previous expando stops at the end of line, there must be a way
to fill the gap between two items via the %>X
expando: it puts as many characters X in between two
items so that the rest of the line will be right-justified. For example,
to not put the version string and hostname the above example on the left
but on the right and fill the gap with spaces, one might use (note the
space after %>):
set status_format = "%B: %?n?%n&no? new messages %> (%v on %h)"
%*X
Normal right-justification will print everything to the left of the
%>, displaying padding and whatever lies to the
right only if there's room. By contrast, “soft-fill” gives
priority to the right-hand side, guaranteeing space to display it and
showing padding only if there's still room. If necessary, soft-fill will
eat text leftwards to make room for rightward text. For example, to
right-justify the subject making sure as much as possible of it fits on
screen, one might use (note two spaces after %* : the
second ensures there's a space between the truncated right-hand side and
the subject):
set index_format="%4C %Z %{%b %d} %-15.15L (%?l?%4l&%4c?)%* %s"
Various format strings contain expandos that display the size of
messages in bytes. This includes
%s in $attach_format,
%l in $compose_format,
%s in $folder_format,
%c in $index_format,
and %l and %L in $status_format.
There are four configuration variables that can be used to customize
how the numbers are displayed.
$size_show_bytes will display the number of bytes when the size is < 1 kilobyte. When unset, kilobytes will be displayed instead.
$size_show_mb will display the number of megabytes when the size is >= 1 megabyte. When unset, kilobytes will be displayed instead (which could be a large number).
$size_show_fractions, will display numbers with a single decimal place for values from 0 to 10 kilobytes, and 1 to 10 megabytes.
$size_units_on_left will display the unit (“K” or “M”) to the left of the number, instead of the right if unset.
These variables also affect size display in a few other places, such as progress indicators and attachment delimiters in the pager.
Usage:
mailto_allow {
*
|
header-field
... }unmailto_allow {
*
|
header-field
... }
As a security measure, Mutt will only add user-approved header fields from a
mailto: URL. This is necessary since Mutt will handle
certain header fields, such as Attach:, in a special way.
The mailto_allow and unmailto_allow
commands allow the user to modify the list of approved headers.
Mutt initializes the default list to contain the
Subject and Body header fields,
which are the only requirement specified by the
mailto: specification in RFC2368, along with
Cc, In-Reply-To, and
References, to support mailing list URLs.